Full-automatic blow moulding machine
Main technical features
| Output |
depend on bottle design |
3200-4000pcs/h |
| Product specifcation |
body diameter |
20mm-100mm |
| height |
50mm-350mm |
| neck diameter |
15mm-38mm |
| Mould |
cavity |
4cavity |
| mould thickness |
240mm |
| mould valid area |
500*500mm |
| Main machine power |
electrical source power |
380v/202v 3phase 50/60hz |
| power |
49kw |
| really use power |
14kg |
| Air source |
lp air compressor |
1.6m3/min1.0Mpa1set(7.5KW) |
| hp air compressor |
1.0m3/min3.0Mpa 2set(each set 11KW) |
| Cooling water |
air dryer |
2.0m3/min 3.0Mpa 1set |
| cooling water |
15L/min |
| Main machine Size |
L*W*H |
1908*1858*1920mm |
| Main machine weight |
|
3600kg |
Auxiliary equipment
pre-form unscrambler is equipped
|
L*W*H |
376*106*186mm |
| weight |
250kg |
| Resin available |
|
PET /PE |
